SCHRAMM T200XD PORTABLE TOP HEAD DRILLING RIG – #10031

DRILLING CAPACITY: 4,000’+ PORTABLE TOP DRIVE – TRAILER MOUNTED

DRILL RIG CARRIER: GOOSENECK TRAILER MOUNTED, 3-AXLES WITH 4-HYDRAULIC OUTRIGGERS-FRONT 5” BORE X 36” STROKE; REAR BORE 5” X 41” STROKE

TOP HEAD: FOUR, 2-SPEED, HIGH TORQUE HYDRAULIC MOTORS, APPROX. 0-90 RPM @ 17,500 FT-IBS; 0-180 RPM @ 7,670 FT-LBS.; TITLING CAPACITY

MAIN POWER: DETROIT MTU 12V-2000TA DDEC TIER 2, 760 BHP @ 1,000 RPM, WITH (2) 110 GALLON FUEL TANKS

HYDRAULICS: TEN HYDRAULIC PUMPS, ALL HYDRAULICS IS FULLY FILTERED, PROTECTED BY RELIEF VALVES AND AN OIL COOLER

MAST: TELEMAST-TELESCOPING CONSTRUCTION, HOISTING CAPACITY-200,000# (ACTUAL); TOP HEAD TRAVEL-50 FT; PULL DOWN CAPACITY-32,000# @ 200 FPM; HOIST SPEEDS-0 TO 130,000# @100 FPM; 131,000 TO 180,000# @ 75 FPM;181,000# @ 25 FPM

WORKING DIA.: 40” ABOVE TABLE; 48” BELOW TABLE

WST (43)POWER BREAK OUT: HYDRAULICALLY OPERATED FROM MAIN CONTROL PANEL – LOWER JAWS GRAB AND HOLD THE LOWER JOINT WHILE THE UPPER JAWS GRAB AND ROTATE THE UPPER JOINT TO MAKE OR BREAK THE CONNECTION

DRILLING DISPLAY: SCHRAMM iCONTROL DRILLING DISPLAY MONITORS: ROTATION RPM & TORQUE, HOOK LOAD, WEIGHT ON BIT, LINE, MAKE/BREAK TORQUES, & ENGINE OPERATING PARAMETERS

LIGHTING: LED LIGHTING FIXTURES MOUNTED ON THE MAST AND LED FLOODLIGHTS MOUNTED ON TOP OF FIXED MAST

SUBSTRUCTURE: LENGTH = 46’; WIDTH = 10’, HEIGHT = 36”, WEIGHT APPROX. = 30,000 LBS.

PIPE HANDLER: SCHRAMM’S EXCLUSIVE LOADSAFE TRAILER MOUNTED DRILL PIPE, COLLAR AND CASING HANDLING SYSTEM – WITH HYD. PIPE RACKS

COMPRESSORS: XHP 1170 CFM HIGH PRESSURE ROTARY SCREW AIR COMPRESSORS

DRILL FLUID SYSTEM: 350 BBL CUSTOM MUD TANK WITH MiSWACO LINEAR SHAKER & 900 GPM DESANDER/DESILTER MUD CLEANER SYSTEM, 50 HP, 5X6 MISSION VFD CONTROLLED MIXING AND CIRCULATING PUMP

GENERATOR: 100KW TIER 4 DIESEL POWERED UNIT

FUEL TANK: 2000 GALLON DOUBLE WALL CONSTRUCTED, MOUNTED ON AUXILIARY TRAILER

DOG HOUSE: SELF CONTAINED TRAILER MOUNTED DOG HOUSE WITH SUPPORT TOOLING, WELDERS AND WORK STATION

SWIVEL: 7 X 4 MATRIX, SHORTENED SIDE ENTRY SWIVEL ASSEMBLY, 5-1/2” PIN UP WITH 4” INNER TUBE

DRILL PIPE: 4,000’ – 7” OD X 4” ID INNER TUBE, EXTERNAL UPSET MATRIX DUAL-WALL DRILL PIPE, 40’ FIXED LENGTHS & 4,000’ – 4 1⁄2” OD ATLAS COPCO 2-7/8” IF PIPE, 30’ FIXED LENGTHS

DRILL COLLARS: DI22 X 20 FT, 10.75” OD AND NON-ROTATING STABILIZERS, 11” OD 8.25” BOX X PIN